User manual

Figure 12: After the Connection

o After successfully connecting, note that the Bluetooth

wireless

connection light has turned blue to indicate an active Bluetooth

wireless

connection. 

o You are now connected via the serial port as if you had a cabled

connection. Close Shark Config and proceed to interact with the

instrument just as if you were connected via a serial cable.

o You may select Disconnect to close the Bluetooth

connection. This will

turn the blue light off.

3.4 Using Shark Config over a Bluetooth

link

The Shark Config program also allows setting up The Shark over a Bluetooth

wireless

connection. This is a key feature in the use of The Shark. If you are using embedded

Bluetooth

wireless technology in some form (with your laptop or PC), or have a USB or

Compact Flash card dongle using Bluetooth

wireless technology installed on your

computer, then it is possible to use this connection to The Shark to change some of the

settings.