User manual

2004 Stevens Water Monitoring Systems Inc. All Rights Reserved.
14
Figure 3: Shark Config Communications Settings
 Select Comm Settings from the left bar to open the Communication
Settings window. 
2. Select the Serial Port from the list that you used when attaching
The Shark to your PC.
3. Select the Baud Rate from the list that matches The Shark's baud
rate. The Shark's factory default is 9600 bps. If you do not
remember the baud rate for your Shark, see #4. Otherwise, skip to
#5.
4. Select Discover Baud Rate to attempt to connect using the selected
serial port at each possible baud rate.
5. Select Connect to connect your laptop or PC to The Shark.
6. The Serial indicator light on the Shark Config program turns green
when Shark Config program is actively connected to The Shark
device. Otherwise, it is gray.