Specifications

benchmarkwireline.com
P. O. BOX 850
Fax: [phone]
Phone: [phone]
Simonton,Texas 77476
36220 FM 1093
SHARK MANUAL Rev H Page 11 of 34 Aug 2009
3.3 Make sure line is laying slack and head is free to move. Press the T Zero
button and tension value should read 0.
3.4 Press the T Cal button and verify that the tension reads close to 4000 lbs.
(1815 kg).
3.5 Press the Zero Depth button to set the depth to zero when the tool is
hanging at the zero point.
3.6 Simultaneously press the enable and zero button on the backup display
panel at this time to zero it.
3.7 At this point, the system is ready to log.
3.8 Operators must remain alert for visual indications of mechanical failures
such as excessive vibration, wheel and roller slippage or lockups that signify
bearing or shaft failures. If damaged or worn parts are detected or
suspected, the unit should be immediately repaired.