Specifications

ManualsBrandsShark ManualsDomestic Appliances7.2 VDC

benchmarkwireline.com

P. O. BOX 850

Fax: 281.342.4848

Phone: 281.342.6415

Simonton,Texas 77476

36220 FM 1093

SHARK MANUAL Rev H Page 1 of 34 Aug 2009

The Shark

SLICKLINE MEASUREMENT DEVICE

WITH COMBINED DEPTH/TENSION

AMSLA101: 2mv/v Load Pin

AMSLA102: 0 – 1.5vdc Load Pin

AMSLA103: 4-20ma Load Pin

CONTENTS

1.0 GENERAL

2.0 TECHNICAL DESCRIPTION AND SPECIFICATIONS

3.0 OPERATION

4.0 MAINTENANCE AND REPAIR

5.0 RECOMMENDED SPARE PARTS

6.0 DRAWINGS AND PARTS LISTS

Summary of content (34 pages)

PAGE 1
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com The Shark SLICKLINE MEASUREMENT DEVICE WITH COMBINED DEPTH/TENSION AMSLA101: 2mv/v Load Pin AMSLA102: 0 – 1.5vdc Load Pin AMSLA103: 4-20ma Load Pin CONTENTS 1.0 2.0 3.0 4.0 5.0 6.
PAGE 2
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 1.0 GENERAL The "SHARK" Slickline Measuring Device is a heavy duty two wheeled device which accurately measures both wireline depth and tension. It minimizes wire abrasion and fatigue by using a non reverse bend configuration. The device is designed to be mounted in front of the wireline drum on a spooling mechanism.
PAGE 3
6220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com With the BenchMark Wireline Products Winchman's Panel, depth can be accurately measured on different sized lines without changing wheels. This is done electronically by the panel using the depth information provided by an encoder. Changes in wire size are accounted for by the panel software. Wire stretch can also be automatically calculated by the panel.
PAGE 4
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 2.0 TECHNICAL DESCRIPTION AND SPECIFICATIONS 2.1 WIRE PATH: The wire runs from the well around the measure wheel (wheel nearest drum) then around the tension wheel and back across the top of the measuring wheel onto the drum. Even though the wire runs side by side across the top of the measure wheel, the system is designed to prevent wire to wire rub.
PAGE 5
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com panel operates on 12v and supplies the necessary power to the encoder and load pin. A backup depth system is available to provide another independent depth measurement. Depth is measured by a frictionless magnetic pickup mounted in the measuring head. The pickup consists of magnets imbedded in the measure wheel coupling and two hall affect devices mounted next to the shaft.
PAGE 6
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 2.3 TENSION SPECIFICATIONS: The wheel nearest the well rotates on an axle pin that is instrumented with strain gauges. These strain gauges produce an electrical signal proportional to the magnitude of line tension. The wire always makes a complete 180 degree wrap around the tension wheel so rigup angle does not affect the tension measurement.
PAGE 7
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 4-20MA CURRENT LOOP Power Requirements: +24vdc input power Interface: Proprietary circuit board which amplifies the load pin signals and provides a 4-20ma current loop output. 4 ma = 0 lbs (0 kg) 16.8 ma = 4000 lbs (1814 kg) - shunt cal 20ma = 5000 lbs (2268 kg) 2.4 TEMPERATURE STABILITY <= <= .015% full scale / deg F on zero .
PAGE 8
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.
PAGE 9
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 3.0 SYSTEM OPERATION 3.1 Determine wireline size to be used – .092" to 3/16” Since the wireline wraps around the depth wheel, the circumference of the depth wheel will change with a change in wire size. The wheel size needs to be corrected for wireline size in order to accurately measure depth.
PAGE 10
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.
PAGE 11
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 3.3 Make sure line is laying slack and head is free to move. Press the T Zero button and tension value should read 0. 3.4 Press the T Cal button and verify that the tension reads close to 4000 lbs. (1815 kg). 3.5 Press the Zero Depth button to set the depth to zero when the tool is hanging at the zero point. 3.
PAGE 12
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 4.0 MAINTENANCE AND REPAIR 4.1 PRE AND POST JOB CHECKS Between jobs, check the measuring and guide wheels for looseness, play, out-ofroundness, worn or rough sounding bearings, or other mechanical conditions that could affect measurement accuracy. Visually inspect the interiors of the electrical connectors for the encoders and electronic load axle for dirt and evidence of insulation breakdown.
PAGE 13
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 4.2 MONTHLY MAINTENANCE Grease the wheels and bearings that are fitted with a grease fitting. Use a marine grade grease. An inverted grease nozzle is supplied with each head. This nozzle (BenchMark p/n AM5KP130) will fit any standard grease gun.
PAGE 14
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 4.3 ASSEMBLY / DISASSEMBLY PROCEDURES 4.3.1 ELECTRONIC LOAD PIN REMOVAL The electronic load pin is held in place by one retaining ring on the outer end of its shaft. Remove the retaining ring. The load pin can then be removed from the mounting frame. 4.3.2 BACKUP DEPTH MAGNETIC PICKUP REMOVAL AND INSTALLATION The backup depth magnetic pickup is mounted to the encoder adapter.
PAGE 15
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 5.0 RECOMMENDED SPARE PARTS Following is a list of recommend spare parts. Parts designated REMOTE are recommended only for areas that have a very difficult time getting parts shipped to. For all other areas, it should not be necessary to stock the REMOTE parts locally. .
PAGE 16
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 6.0 DRAWINGS AND PARTS LISTS 6.
PAGE 17
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.
PAGE 18
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.
PAGE 19
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.
PAGE 20
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.
PAGE 21
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.
PAGE 22
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.
PAGE 23
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.
PAGE 24
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 6.3 DIFFERENTIAL LOAD PIN AMSLA010 45 AMS8P055 46 AMS8P056 93 C276P040 94 AMS8P066 95 AM5KP118 ASSY LOAD AXLE 1.5 V DIFFERENTIAL CONN KPT 02A16-8P DUST CAP KPT81-16C O-RING 2-235 BUNA N L/P LID 3-1/8 X 3-3/8 X 1/8 O-RING 2-136 BUNA N L/P HSG 1.98ID X 2.19OD X 0.
PAGE 25
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 6.
PAGE 26
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 6.4 4-20MA CURRENT LOOP LOAD PIN AMSLA015 ASSY LOAD AXLE 4-20MA CURRENT LOOP 45 AMS7P013 46 AMS1P029 93 C276P040 CONN MS3102E-18-9P DUST CAP MS25042-18DA O-RING 2-235 BUNA N L/P LID 3-1/8 X 3-3/8 X 1/8 1 EA 1 EA 1 EA 94 AMS8P066 95 AM5KP118 O-RING 2-136 BUNA N L/P HSG 1.98ID X 2.19OD X 0.
PAGE 27
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 6.
PAGE 28
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 6.
PAGE 29
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.
PAGE 30
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 6.5 HI RESOLUTION ENCODERS AMSLP061 ENCODER HD2.5D-0-SS-37F-1200- ABZ-C-69-S-18-15-SPECIAL AMS7P131 ENCODER HD2.
PAGE 31
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.
PAGE 32
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 6.
PAGE 33
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 7.0 7.1 OPTIONAL ACCESSORIES PIVOT PLATE P/N AMSLA029 The pivot plate is designed to allow the measuring head to be pivoted 90 degrees when not in use. This allows it to fit inside a smaller compartment during transport. It is a two piece assembly that sits between the measuring head and the horizontal spooling bars.
PAGE 34
36220 FM 1093 P. O. BOX 850 Simonton,Texas 77476 Phone: 281.342.6415 Fax: 281.342.4848 benchmarkwireline.com 7.2 LOAD PIN REPLACEMENT PIN P/N AMSLM013 In the event the load pin needs to be removed for calibration or repair, a pin can be inserted in its place to support the tension wheel. At this time a hydraulic load cell can be used to provide tension. The depth portion of the measuring head will still function properly and accurately. A 3/4” diameter shoulder bolt can be used as a substitute.