Specifications

e Electro Industries/GaugeTech Doc # E145701 6-1
Chapter 6
Using the Meter
6.1: Introduction
Q
The Shark 100 meter can be configured and a variety of functions can be accomplished simply by
using the Elements and the Buttons on the meter face. This chapter will review Front Panel
Navigation. Complete Navigation Maps can be found in Appendix A of this manual.
6.1.1: Meter Face Elements
• Reading Type Indicator:
Indicates Type of Reading
• IrDA Communication Port:
Com 1 Port for Wireless
Communication
• % of Load Bar:
Graphic Display of Amps
as % of the Load
• Parameter Designator:
Indicates Reading Displayed
• Watt-Hour Test Pulse:
Energy Pulse Output to Test
Accuracy
• Scale Selector:
Kilo or Mega multiplier of
Displayed Readings
6.1.2: Meter Face Buttons
Q
Using Menu, Enter, Down and Right
Buttons, perform the following functions:
• View Meter Information
• Enter Display Modes
• Configure Parameters
(Password Protected)
• Perform Resets
• Perform LED Checks
• Change Settings
• View Parameter Values
• Scroll Parameter Values
• View Limit States
Figure 6.1: Face Plate of Shark 100 with Elements
Figure 6.2: Face Plate of Shark 100 with Buttons
Reading Type
Indicator
IrDA
Communication
Port
% of Load Bar
Watt-Hour
Test Pulse
Scale
Selector
Parameter
Designator
Menu
Enter
Down Right