Specifications

e Electro Industries/GaugeTech Doc #: E145701 3-2
3.2: ANSI Installation Steps
ANSI INSTALLATION STEPS:
1. Insert 4 threaded rods by hand into the back of meter. Twist until secure.
2. Slide ANSI 12 Mounting Gasket onto back of meter with rods in place.
3. Slide meter with Mounting Gasket into panel.
4. Secure from back of panel with lock washer and nut on each threaded rod.
Use a small wrench to tighten. Do not overtighten.
Threaded Rods
NEMA 12 Mounting Gasket
Lock Washer
and Nut
Figure 3.7: ANSI Mounting Procedure