Specifications

e Electro Industries/GaugeTech Doc #: E145701 2-3
2.1.3: V-SSwitch®® Technology
The Shark® 100 meter is equipped with EIG’s exclusive V-Switch® Technology. V-Switch® is a virtual
firmware-based switch that allows you to enable meter features through communication, allowing
the unit to be upgraded after installation to a higher model without removing the unit from service.
Q
Available V-Switches
®®
V-Switch 1 (-V1): Volts and Amps Meter - Default
V-Switch 2 (-V2): Volts, Amps, kW, kVAR, PF, kVA, Freq
V-Switch 3 (-V3): Volts, Amps, kW, kVAR, PF, kVA, Freq., kWh, kVAh, kVARh & DNP 3.0
V-Switch 4 (-V4): Volts, Amps, kW, kVAR, PF, kVA, Freq., kWh, kVAh, kVARh, %THD
Monitoring, Limit Exceeded Alarms and DNP 3.0
2.1.4: Measured Values
The Shark® 100 meter provides the following Measured Values all in Real Time and some additionally as
Avg, Max and Min values.
Measured Values Real Time Avg Max Min
Voltage L-N X X
Voltage L-L
Shark® 100 Meter Measured Values
X
Current Per Phase X X
X
X
Watts X X X X
VAR X X X X
VA X X X X
PF X X X X
+Watt-Hr X
- Watt-Hr X
Watt-Hr Net X
+VAR-Hr X
-VAR-Hr X
VAR-Hr Net X
VA-Hr X
Frequency X X X
%THD X X
X
Voltage Angles X
Current Angles X
% of Load Bar X
Current Neutral X
X
X
X