Specifications

E Electro Industries/Gauge Tech Doc# E145721 E-7
Click
Finish
to close the
Found New Hardware Wizard
.
18. To
verify
that your Adapter has been installed properly, click
Start
>
Settings
>
Control
Panel
>
System
>
Hardware
>
Device Manager
. The USB to IrDA Adapter should appear under both
Infrared Devices and Modems (click on the + sign to display all configured modems). See the
example screen below.
NOTE:
If the Adapter doesn’t show up under Modems, move it away from the meter for a minute
and then position it pointing at the IrDA, again.
19. Double-click on the
Standard Modem over IR link
(this is the USB to IrDA Adapter). You will
see the
Properties
screen for the Adapter.