Specifications

E Electro Industries/Gauge Tech Doc# E145721 E-1
Appendix E
Using the USB to IrDA Adapter (CAB6490)
E.1: Introduction
Com 1 of the Shark
®
100 meter is the IrDA port, located on the face of the meter. One way to
communicate with the IrDA port is with EIG’s USB to IrDA Adapter (CAB6490), which allows you to
access the Shark
®
meter’s data from a PC. This Appendix contains instructions for installing the USB
to IrDA Adapter.
E.2: Installation Procedures
The
USB to IrDA Adapter
comes packaged with a
USB cable
and an
Installation CD
. Follow this
procedure to install the Adapter on your PC.
1.
Connect
the USB
cable
to the USB to IrDA
Adapter
, and
plug
the USB into your PC’s
USB port
.
2. Insert the
Installation CD
into your PC’s CD ROM drive.
3. You will see the screen shown below
.
The
Found New Hardware Wizard
allows you to install the
software for the Adapter. Click the Radio Button next to
Install from a list or specific location.
4. Click
Next
. You will see the screen shown on the next page.