Specifications

e Electro Industries/GaugeTech Doc # E145701 D-8
Q
Power Factor ( Point 13 )
This point is formatted as a 2's complement integer. It represents Power Factors from -1.000
( 0x0FC18 ) to +1.000 ( 0x003E8 ). When in Open Delta operation, Total Power Factor
( Point 13 ) is always zero.
Q
Frequency ( Point 14 )
This point is formatted as a 2's complement fraction. It represents the Frequency as measured on
Phase A Voltage in units of cHz ( centiHertz, 1/100 Hz ). Inputs below 45.00 Hz are pinned at 0
( 0x0000 ), while inputs above 75.00 Hz are pinned at 9999 (0x270F ).
Q
Maximum Demands of Total Power ( Points 15 - 19 )
These points are formatted as 2's complement fractions. They represent a fraction of 4500 W
Secondary in normal operation, or 3000 W Secondary in Open Delta operation. Inputs above/below
+/-4500 or +/-3000 W Secondary will be pinned at +/-4500 or +/-3000 W Secondary, respectively.
Point Reading
13 Power Factor Total
Point Reading
14 Frequency
Point Reading
15 Maximum Positive Demand Total Watts
16 Maximum Positive Demand Total VARs
17 Maximum Negative Demand Total Watts
18 Maximum Negative Demand Total VARs
19 Maximum Average Demand VA