User`s manual

59
2.3.1.3 ATTENTIONS TO FOLLOW DURING LIFTING AND TRANSPORTING
During liing and transport it is necessary to follow the precautions described in this paragraph.
- Check and if necessary so that all parties can move are correctly attached.
- Do not li, for any reason, the various parts of the machine by grasping them for non-structural elements (e.g., cables and casings).
2.3.2 Installation and connections
2.3.2.1 RISKS PRESENT DURING INSTALLATION AND CONNECTION
During connection setup and there are risks associated with:
- operations on the machine by unqualied personnel, uninformed, untrained or improperly tted;
- contact with live elements;
- damage of the machine during installation and connection.
2.3.2.2 PERSONAL PROTECTIVE EQUIPMENT REQUIRED
2.3.2.3 SIGNS PRESENT
The machine is equipped with special reports of danger and prohibition;
2.3.2.4 ATTENTIONS TO FOLLOW DURING INSTALLATION AND CONNECTION
During installation and connection is necessary to follow the precautions described in this paragraph.
- Use auxiliary equipment and any other machinery or equipment (electric or pneumatic) only aer you understand the instructions in its use and maintenance
manuals or aer a specic training and formalized.
- Choose installation location:
- provides suicient space for normal use as well as for the maintenance of the machine, including space for any peripheral equipment,
- allows to carry out correctly the necessary connections for operating the machine,
- having the characteristics described in the paragraph concerning the
- Environmental Conditions of the installation, and, in particular, verify that the installation location of the machine is equipped with adequate forced ventila-
tion system (recommended 30 air changes per hour);
- Before proceeding with the rst running of the machine make sure that the parts which make up for any physical damage due to bumps, tears or abrasions and
that all connections are correct and have been carried out without the possibility of disconnession
2.3.3 Use of the machine
2.3.3.1 RISKS PRESENT DURING USE OF THE MACHINE
Risks present during use of the machine:
During use of the machine, there are risks associated with:
- use of the machine by unqualied people, not trained, uninformed, untrained or improperly tted;
- risk of crushing close upper limb moving bodies of engines controlling the movements along three axes, and close to the work surface in the event of sinking;
- danger of projecting components or parts of components, in the case of wrong performance or processing in case of obstruction of the extrusion nozzle;
- danger of inhaling fumes produced by hot extrusion process;
- danger of scalding and burns due to contact with extrusion nozzles, the work plan, the material being deposited on the oor and just settled;
- contact with live parts (due to poor maintenance of the electrical parts);
- danger of direct exposure to articial optical radiation (LED).
2.3.3.2 PERSONAL PROTECTIVE EQUIPMENT REQUIRED
2.3.3.3 SIGNS PRESENT
The machine is equipped with special reports of danger and prohibition;