User`s manual

22
the inside full, empty or partially empty, or the walls are made with one, two, three or more passes.
Even the thickness of each layer is one of the parameters. The same object can be printed full, empty,
with 100 or 200 slices and more or less robust and sti despite having all versions a similar appearance.
Printing le
The G-Code les, containing instructions for navigating the various mechanical parts of the printer
according to specic parameters and settings has a limited compatibility between dierent print-
ers. While the STL le of the template can be used by anyone with a 3D printer to create a printing
G-Code, a G-Code les is denitely running for the printer for which it was created but could be unus-
able with other printers. If it is not clearly compatible with NG Sharebot there try to print les that
you nd on the net because they may have malicious entries to your printer.
The le also contains the heated printing bed temperatures and those of the extruder, tying the le
not only to the printer but also to the material to be used. As we shall see in the following pages,
with the LCD Panel it is possible to modify some parameters when printing: Sharebot NG oers you
the possibility to edit the G-Code in order to adapt it to dierent materials without having to redo the
process of slicing.