User's Guide

13
Chapter 3: Basics
Turning the Joint Module On/Off
The on/off switch can be found on the back of the module, as highlighted in Figure 6 - Turn
the switch left and right to turn the Joint module (letf) on or off..
On: When the module is on it can be programmed wirelessly, the module’s button will light
up and the color will change when pressing the button.
Off: When the module is off the colored light is off unless it is charging or the button is being
pressed. If the button is pressed while the module is off, the light will turn on and display the
module’s battery level.
Triggering Sleep Mode in Fable Spin
Fable Spin can be put into Sleep Mode, as highlighted in Figure 6 - Turn the switch left and
right to turn the Joint module (letf) on or off..
On: When the module is on it can be programmed wirelessly, the module’s button will light
up and the color will change when pressing the button.
Sleep Mode: When the module is in Sleep Mode the colored light is off unless it is charging
or the button is being pressed. If the button is pressed while the module is sleeping, the light
will turn on and display the module’s battery level.
Figure 6 - Turn the switch left and right to turn the Joint module (letf) on or off. For
Fable Spin press on the Shape logo for 3 seconds to put in sleep mode.