Installation Instructions

Shape Products, LLC
1821 Indianhead Dr. Menomonie, WI 54751 | [phone] Fax [phone]
www.ShapeProducts.com
Bubble Cover Installation Instructions
Limited Warranty
1. Place cover over window well.
2. Drill mounting holes (2) on both sides of window well cover thru plastic and mark anchor
hole locations on both sides of the window.
3. Determine length and type of anchor screws required, depending on aluminum, wood and
masonry surfaces adjoining the window area.
4. Remove cover and drill anchor holes to proper sizes.
5. Position cover over window aligning holes with the anchors. Secure the cover to the wall
using anchor screws. If gaps occur because do siding overlap, they may be filled with caulk.
Note: Sufficient ventilations should remain to allow moisture to escape.
Cleaning: Window cover may be cleaned with a mile solution of detergent and water. Use of
harsh chemicals and scouring powders should be avoided.
Shape Products, LLC. warrants its Invisible Bubble window well covers for a period of one (1) year from the date of purchase. This warranty only extends to the
original purchaser. This warranty does not apply to damage from accident, misuse, normal wear, alteration, improper installation, improper maintenance or
abuse. ANY IMPLIED WARRANTIES WHICH THE PURCHASER MAY HAVE ARE LIMITED IN DURATION TO ONE (1) YEAR FROM THE DATE OF
PURCHASE. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not imply to you. Shape Products, LLC.
will replace a defective window well cover free of charge, (except for dealer labor and shipping). Contact Shape Products, LLC. at the address listed below (or
see your Shape Products dealer) to obtain service under this warranty. Proof of purchase is required and replacement is the sole remedy of the purchaser
under this warranty, and in no event shall Shape Products, LLC. be liable for any incidental or consequential damages, losses or expenses. Some states do not
allow the exclusion of incidental or consequential damages, so the above limitation or exclusion may not apply. This warranty gives specific legal rights and you
may also have other rights that vary from state to state.
Products
www.ShapeProducts.com