Technical Specifications

CUTTING GUIDE
Clear Glass Sheet
Tools Required
1
2
3
cut using a straight edge and wax pencil.
*Clamps may be used to hold your straight
edge during the cutting process. This will
allow you to use your straight edge as
a cutting guide.
Dip the round blade of your glass cutter
into the lubricating oil. Make one
continous cut along your designated
mark. Do not attempt to score twice.
Carefully pick up the sheet and place the
scored side down. Using the weight end of
the cutter, lightly tap along the score line
to help deepen the score. Then gently
break the sheet along the score line.
Be sure to break the sheet away from
yourself.
Products
5205 Freitag Drive, Menomonie, WI 54751
Phone: [phone] Fax: [phone]
www.ShapeProducts.com Products
Straight EdgeWax Pencil Glass Cutter Lubricating Oil Protective Eyeware Protective Gloves
Lubricating Oil
Cutting Wheel
Tapping Weight
Breaking Notches
Used to break smaller cuts
Lightly Lubricate
Cutting Wheel
CUTGUIDE2015