User's Manual

internal memory of the device won ’ t be displayed. The folders of SD card are

displayed as “ SD card 1 ” and “ SD card 2 ” . The folders of external flash disk are

displayed as “ Flash Disk 1 ” and “ Flash Disk 2 ” . The system memory can only be

used for storing the system files, with a capacity of 2GB. The capacity of the SD

card and the external flash disk is subject to the device itself. The system can

support an SD card of 32GB at maximum.

For details of the memory, please refer to the part “ 8.6 — SD card and device

’

memory ”

2.5

2.5 Power-on/off

Power-on/off

1. Power-on: When the battery is fully charged, press the power switch for two

seconds to power on the device. At the time, the device will vibrate once. After

powered on, the system will enter the screen-locking interface, where you can

move up the unlocking icon to enter the main interface and down to the icon of

electronic photo frame to enter the interface where you can play the pictures .

2. Power-off: Press the power switch for four seconds, and the system will pop up a

interface for confirmation. Click the power-off icon at the bottom of the screen, and

the device will be turned off. At the time, it will vibrate once. Move up the

power-off icon, the system will return to the power-off interface.

3. Sleeping mode: Press the power switch for one second, and the system will enter

the sleeping mode, in which the LCD screen will turn black. In this mode, you can

press any key to wake up the system. Once waken up, the system enters the