Operating Instructions

3
Note:Long press the switch for 1 second to turn off.Long press the remote control main body button for
3 seconds to turn off.
MAIN FUNCTION
Please put the aircraft on the ground.Long press the
switch for 1 second to turn on.The indicator lights change
from flash quickly to flash slowly.Pick up the aircraft and
throw it out. The aircraft will hover in the air.Short press
the water droplet remote control, the aircraft landed slowly
on the ground to stop flying. Short press power button is
reset function.Long press the switch for 1 second to turn off.
1.Hand Throwing Induction Mode
There is no infrared obstacle avoidance function by default
when the aircraft turned on.Press finger button 3 times
quickly in flight to starting infrared obstacle avoidance mode.
The aircraft indicator light flashes quickly 3 times. Press
finger button 3 times quickly again to exit infrared obstacle
avoidance mode.
2.Infrared Obstacle Avoidance Mode
Short press the remote control finger button in
flight, the aircraft indicator light flash quickly, and
you can tilt the remote control to roll accordingly.
When the remote control is motionless for 2 seconds,
it will exit the roll function.
3.Rolling
Short press the remote control main body button
in flight, the aircraft will land slowly on the ground
to stop flying.
4.Slow Descent
When the aircraft lost control in flight，long press
the the remote control main body button for 1
second to emergency stop.
5.Emergency Stop
Stop
When the aircraft enters into the low-voltage protection, the indicator light flashes slowly, and it
landed slowly on the ground after 30 seconds to stop flying.
6.The Low-Voltage Protection Function
MAINTENANCE
1.The quadcopter shall be cleaned regularly with clean soft cloth.
2.Avoid strong sunshine and heat.
PdfEditor 4.0.0.14 Testversion - https://www.pixelplanet.com/de/pdfeditor/