Remote control boat instruction manual
Adjust the maximum motor speed: 1. In normal use, the adjusted motor maximum speed is between 75% and 90%. Press the motor left or right acceleration button, the remote control will be BE, indicating that the speed is increased by 1. When the speed is increased to 90%, the remote control will not press BE when the accelerator button is pressed, indicating that it has been set to the maximum.
button. The material can only be discharged when the boat is stopped. Voltage indication: When the voltage of the remote controller is lower than 4.9v, the LED on the remote controller flashes slowly, indicating that the remote control battery is low voltage. Ship's voltage indication: More than 7.3v 4 LEDs are all bright More than 7.0v 3 LEDs bright More than 6.3v 2 LEDs bright Less than 6.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
