User Manual

3
2-6 While setting the month, date, year and week, the number will beat on the screen
Chapter 3. Alarm Setting
3-1 When the clock is in normal condition or the radio is playing, press [ ALARM SET ] to see the
numbers preset, after 3 seconds it will display the present time again.
3-2 Setting method: Long press [ ALARM SET ] key for 2 seconds, set hour → set minute → alarm
mode (buzzing/ radio), alarm sound and volume → select exit
Step1: Long press [ ALARM SET ] key for 2 seconds to enter alarm setting mode, and the Hour
will flash, then adjust it through [ UP ]，[ DOWN ]. (The default alarm time is 12：00 am).
Step2: Short press [ALARM SET] key, and the Minute will flash, then adjust it through [ UP ] ,
[ DOWN ] key
Step3: Short press [ALARM SET] key, it will flash and buzz, select buzzing or radio ( the default
status is buzzing) through [ UP ], [ DOWN ] key; press [ VOL- ]，[ VOL+ ] to adjust the volume
(03-16 level to be chosen) (the default volume is level 12).
Step4: Short press [ALARM SET] key, exit. If there is no action in 8 seconds, it will exit from the
current setting state.
Step5: Short press [ALARM ON/ OFF] key to turn on or turn off the alarm ( the default status is
[ALARM OFF] ), the Alarm mark will be on the clock screen when the clock’s screen is light; and
the mark will disappear after the clock is turned off.
3-3 The duration of each setting is 8 seconds (after press [ ALARM SET ], the setting shall be
confirmed within 8 seconds, if the [ ALARM SET ] is not pressed within 8 seconds during flashing,
it will confirm the present status and return to the time display.)
* Note: The alarm will stop automatically after 60 minutes (without any operation)
Chapter 4. Alarm Function
When the alarm rings, press [DOWN], [UP], [TIME SET], [ALARM SET], [RADIO], [VOL-]
or [VOL +], [12/ 24H], [DST] key to stop the ringing. The alarm will next day ring again at the
same time, and only when you press the [ALARM ON/OFF] key, the mark of alarm on the screen
will disappear so that the alarm is completely turned off (The default status is ALARM ON)
Chapter 5. Alarm Snooze Function
When the alarm rings at the setting time, press [ SNOOZE/ SLEEP/ DIMMER ] key to initiate the
snooze mode. After the sleep mode is activated, it will not ring until 8 minutes passed.
* Note: The duration of the alarm is 60 minutes (without any operation), and the volume of the
alarm starts from low to loud.
Chapter 6. Automatic Shutdown Function
6-1 Press [ SNOOZE/ SLEEP/ DIMMER ] key, the time will present on the display,
120min
→90→60→45→30→15→10→OFF.
6-2 Press [ SNOOZE/SLEEP/DIMMER ] key again to switch the time. After setting, it will enter
into automatic shutdown mode and will automatically shut down at the time you have set. If you
want to shut it down during use, just press [ RADIO ON/OFF ] key, OFF will present and last 3
seconds and then back to the time display.