User Manual

2
1. Pm Indicator
2. Set Time
3. Hour/Tuning-
4. Minute/Tuning+
5. Alarm Set
6. Alarm On/Off
7. Snooze/Sleep/Dimmer
8. DST On/Off
9.12/24h Switch
10. FM Radio On/Off
11. Volume-
12. Volume +
13. Radio Indicator
14. Sleep Indicator
15. Alarm Radio Indicator
16. Alarm Buzzer Indicator
17. DST Indicator
18. Week Indicator
19. Dc Jack
20. USB Port
21. Headphone Jack
22. Battery Backup
23. Speaker
24. Label Area
25. FM Antenna
Chapter 2. Time Settings
2-1 The initial power-up default time is: 2019-1-1 AM 12:00 (the number will flash on the screen,
pressing any key can stop the flashing)
2-2 Long press [TIME SET] (for 2 seconds) to set the time, press once to view the month and date,
press again to view the year, then click to back to the display
2-3 When the clock is in normal condition or the radio is playing, press once to view the month and
the date, press again to view the year, then click once to back to the time display or wait for 3
seconds to back to the time display
2-4 Setting method: long press [TIME SET] key for 2 seconds, → set hour → set minutes → set
month → set date → set year → exit
Step1: Press [ TIME SET ] ( for 2 seconds), the Hour will flash, then adjust it through [ UP ]，
[ DOWN ] (the default time is 12：00)
Step2: Press [ TIME SET ], the Minute will flash, then adjust it through [ UP ]，[ DOWN ].
Step3: Press [ TIME SET ], the Month will flash, then adjust it through [ UP ]，[ DOWN ]（the
default month is January）
Step4: Press [ TIME SET ] and the Date will flash, then adjust it through [ UP ]，[ DOWN ] (the
default Date is 1
st
)
Step5: Press [ TIME SET ] and the Year will flash, then adjust it through [ UP ]，[ DOWN ] (the
default year is 2019, with 19 flashing on the screen)
Step6: Press [ TIME SET ], confirm and exit.
2-5 The duration of each setting is 8 seconds (after press [ TIME SET ], the setting shall be
confirmed within 8 seconds, if the Set is not pressed within 8 seconds, it will confirm the present
status and return to the time display.