Jao wr) BY NORTHWESTERN BELL HONES (BELL Phones 8 ECR ef ert 0 C® aps Excursion® 3073 mew 2 Congratulations on your selection of the Excursion® 39705 from Northwestern Bell Phones. This quality cordless / caller ID telephone, like all Genuine BELL® products; has been designed to give you many years of continuous service and represents the best value for your money. It requires little maintenance and is easy to setup and operate.
IMPORTANT LETHE Read this manual before tempting to setup or use this instrument. It contains important information regarding safe installation and use. Keep this manual for future reference. Also save the carton. packing and proof of purchase to simplify and accelerate any needed action. If you need assistance or service, call (800) 888-8990 between 8:00 a.m. and 4:30 p.m. Pacific Standard Time, Monday through Friday.
HANDSET * BASE UNIT BATTERY PACK MANUAL WARRANTY CARD CARTON CONTENT FIGURE TELEPHONE LINE CORD WALL MOUNT BRACKET
fo TABLE OF CONTENTS IMPORTANT LL. WARNING CART INSTALL LAT CONTROLS CALLER 1D QS DESCRIPTIONS INSTALLATION Cattery stalk POWER CONNECTION GETTING STARTED, Setting the Area Cod [— TELEPHONE OPERATION Tu Receive Call Pause Function Mis Mode Resetting Security Code and Channel CALLER ID OPERATION. Receiving Caller 1D Information... : NEW CALL LED Indicator. Reviewing Caller ID Records... . Eurasia Call Records hed . For Erase a To phrase Al € alto Records. Transferring a d VIP Mod .
on HERNIA Function & Function » 24818 ing PY OFFEND . Function» sing PBX Number oon, Function ® © Sewing Pompous. Time .. Functions suggest Waiting (€4 MASON.
INSTALLATION 6 PRECAUTIONS ii telephone wiring during a :phone fucks in wet the suck is specifically t locations. h insulated telephone wires Of terminals unless the telephone Heine has been disconnected at the : network celeriac. 4. Use cation when installing or modifying telephone fines. 7 MAINTENANCE "1. Use a damp cloth to clean the plastic cabinet. A mild soap will help to remove grease or oil. Never use polish, solvents, abrasives or siring detergents since these can damage the finish, 2.
13 4 covered by the operating instructions. improper adjustments of other controls may result in damage and will often Require extensive work by a qualified technician to restore the product to normal oration. E. if the product has been dropped or the cabinet has been damaged. F. If the product exhibits a distinctive change in performance. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning .
0 OPPORTUNITY to Sustain uninterrupted service 3 If you experience trouble with the telephone, ple tact Northwestern Bell Phones for repatriation information. The telephones company equipment from the network unt! the problem has bin corrected or you sre sure that the equipment 1s not malfunctioning. 6. This equipment may not be used on coin service provided by the freephone company. Connection to party lings is subject to state tariffs.
EXCURSION® 35765 CONTROLS DIAGRAM NEW CALLED | Indicator Elsewhere Joc R Scroll Buttons . Base Unit DIR Button ~~ Antenna Handset Antenna Handset Receiver Handset LCD Panel Shift Right Button HATEMONGER Button TALK Button CALLBACK/ SAVE Button Shift Left Button FLASH / EDIT Button ED Indicator ’ ! IN USE oe / i LED Indicator FUN Button . PAGE WALL | CHARGE LED Indicator Handset Microphone BUTTON MOUNT TONE Pulse Sw teed Charging Contacts Base Unit (Rear View) queers MANUAL ver.
CALLER advantage of the Caller identification ! local telephone company. For more | Home, you can re the Cotton tng Questions and Answers table: Questions Answers a What is Caller | A Caller ID is a device that identifies the calling party iD? before you answer a call. This device can be used to screen unwanted calls and eliminate harassment from annoying calls.
» DESCRIPTOR Handset Co CALLBACK / SAVE BUTT! (CALLBACK) Allows you to automatically Cali back the phone number of a person which is selected from the Caller 10 display, With just , one press of the CALL BACK button. (SAVE) Saves the name and number into the personal directory. &00o| EA OBA I Charge Contacts Used for charging handset batteries. Clean periodically with an alcohol moistened swab. LF LF PREEMPTIVE Button Used to delete one or all of the Caller ID call records.
588) REDIAL / PAUSE (RE/PA) Button Allows you to automatically dial the last phone number dialed (up to 32 digits) ww from the handset. Used to insert a pause in the dialing sequence while (for use in PA BX or long dis. 22 services). Pause time is programmable and can be stored when programming a number in i SCAN / FUN Burton (SCAN) While in TALK mode, it is used to manually select one of the 25 operating channels when you experience interference on the handset.
bee Charge Terminals Used for charging handset batteries. Clean periodically with an alcohol moistened swab. USE LED Indicator Lights solid when the handset is in the TALK rode. NEW CAL? LED Indicator Blinks to indicate that you have new Caller ID call records stored in the handset. RAN PAGE Button Allows you to locate the handset when it is not on the base, or to alert the person near the handset. TONE/PULSE Dialing Switch Allows you to switch the dialing mode to either Touch Tone or Pulse dialing.
EET i: HAAS 1 sa Antone panel will turn on in standby mode after thread Seconds." 4. Replace the battery compartment cover by sliding it up towards the , handset.” NOTE: It i is recommended at the Cd; battery should be fully charged overnight prior to initial use. i. als re Desktop Connection 1. Plug one end of the telephone line + . cord into the telephone line jack on the rear of the base unit. 2. Connect the other end of the line, “cord into a modular telephone jack located on your wall.
GLENN DIARY Ducting dizzy / standby mode, the handset LCD panel will display information in the following format: 5 Fine, Bate 00 an Fi Total ! Cali |New Received TOTAL: 00 Ally Du an During active or TALK mode (after placing a call), the handset LCD panel A will display the following: Khe Channel in use Cal Timer (seconds) 07 3 2 1-555-555Call Timer {minutes) 4 TALK Sympathy Operation Mode | Number you are dialing oul to During active or TALK mode (after receiving a call), the handset LCD panel will displa
NOTE: Lino k cons du section of this manual. TELEPHONE OPERATION To Place a Call 1. Press the TALK button on the handset. The LCD will show “WAITING » while it auto-scans ~ for che clearest channel available out of 25 channels Ir will then display “TAL A gaiter finding the best channel to use. CTD 2. Listen for a dial tone. If you cannot get a dial tone, check your phone > cord and power connections. Refer to the troubleshooting chart for more solutions, i 3. You may then dial the shone number.
Mixed Mode Dialing (Temporary Pulse to Tone Dialing) If you oily have pulse dialing available in your area, accessing special services {bank by phone, tee) require a touch tone signal. Ensure that your TONE/PULSE switch is set to PULSE. While in TALK mode, press the STAR {7) button to switch from Pulse to Tone dialing temporarily. Pulse dialing mode resumes when the call is ended. + If you are receiving a call or dialing out and TALK is pressed, the Excursion® auto-scans for the best channel available.
DEDEKIND DDE) mm i DEE EDT NAVE torque 5. Press the either the or button : when you have finished entering the f name. A blinking line will appear above the name, prompting you to enter the phone number to be stored. oR © CIAO Using the handset keypad, enter the phone number to be stored. | 7. Press and hold the Save io {CALLBACK/ SAVE) button for at &5He ©0006 CBE CARE “least two seconds when you have finished entering the phone number.z 8.
3. Sears Cote stored e * easing the ( «doll through tt orient EET, C8 2DCUEY) | o Pressing the ke, pad bunion which has the first letter of the stored name. 4. Follow steps 3-7 as described in the section “Storing Telephone i Numbers into Memory” to overwrite the selected entry. Deleting Stored Phone Numbers 1. Follow steps 1-3 as described in 2. Press and hold the BEETLE REMOVE button for at least two seconds, The LCD will show “DELETE” while the handset beeps beep to confirm deletion.
te Latter Fi Cain Rent us thu the unit is in standby Klaus ion £6) bok title 2 Pr £3 buttons to review aloe {thee the Se roll {3 or Scroll records. NOTE: For the meaning of symbols or messages that appear on the LCD panel, refer to the “LCD Panel Display Messages” section of this manual. Erasing Call Records The 397052766 can store up to 80 Caller 1D call records. The-DELETE REMOVE button can be used to remove delete previously reviewed call records to conserve call record memory.
preferred call, the first ring will be normal, but the second icing will be a series of short eps instead of the normal ring. + Blocked Call: When receiving an incoming call that has been programmed as a blocked call, only the first ring will be heard. No rings will be heard after the first ring, When VIP Mode is OFF: ¢ All incoming calls will ring normally. Reprogramming VIP Status To assign a Preferred or Block status for a programmed number in memory: 1.
charged for ai least i hours. OUT OF AREA Twist call From an area where Caller in service is not yet offered or ant acc that is not yet providing Caller ID delivery via the long distance network. DATA Senator occ 5 ns, Caller ID information sent by the telephone company may be too weak 10 be detected by the Caller ID. This is not the fault of the Caller ID unit; it can only capture and store the data that was received. .
I. Press the FRANCISCAN button T+ while in standby mode. The LCD panel will display “FUNCTIONS " 2. Press keypad buttons . The LCD will show “CONTRAST”. The default setting set the unit in Edit mode, press the FLASH/EDIT button. The LCD will flash the current contrast number setting. 4. Press either one of the scroll or buttons to select the desired contrast level. 3. To save the desired contrast level, press and hold the CALLBACK/ + SAVE button for about two v seconds. 6.
truncheons 1 swing Bog ONCE You have thw option of wing the ringer ON and OFF, as follows: I. Press the FRANCISCAN button while in standby mode, The LCD panel will display “FUNCTIONS 2. Press keypad buttons . The LCD will show “RING MODE and the current Ring mode setting (ON/OFF), 3. To set the unit in Edit mode, press the FLASH/EDIT button. The LCD will flash the current Ring mode . Setting. + '4. Press either one of the SCROLL buttons to select Ring mode ON or Ring mode OFF mode. 5.
Functions © Sung PRX ON OFF You have wo option of turning the PRX mode ON and OFF, 03 follows: | | 1. Press the FRANCISCAN button while in standby mode. The LCD panel will display “FUNCTIONS >, 2. Press keypad button e , The LCD will show “PRX MODE and the current PBX mode setting (ON/OFF). 3. To set the unit in Edit mode, press the FLASH/EDIT button. The LCD will flash the current PBX setting. 4. Press either one of the SCROLL buttons to select PBX On For PBX OFF mode. 5. To save the desired PBX moc.
SIT Made Function | Bering Payne Time You have the option of setting the pause time {from | to 9 seconds), as follows: {. Press the FRANCISCAN button while in standby mode. The LCD panel will display “FUNCTIONS ™. 2. Press keypad buttons . The LCD * will show “PAUSE TIME. and the current pause time (in seconds). 3. To set the unit in Edit mode, press the FLASH/EDIT button. The LCD will flash the current pause ¢ time setting. « Press either scroll button select the desired pause time. S.
5 tats {On or OFF). * To set the unit in Edit mode, press the FLASH/EDIT baton. The LCD will flash the current Message Waiting s-ingratiating. © Press either one of the SCROLL buttons to cit off the Message Waiting £55 or Waiting §F Predesignate 5. To save the desired Message Waiting mode, press and hold the CALLBACK/ SAVE button for about two seconds. I, G. After the Message Waiting mode Is set, press the FRANCISCAN key to return to standby mode.
a (CHARACTER ENTRY TABLE IF you are assigning names for stored phone numbers into memory, please follow the ble below 10 determine the equivalent keypad keystrokes are needed for a certain character _ Please refer 10 “Storing Phone Numbers Tito Memory” on how to store phone numbers. KEYPAD BUTTON CHARACTERS pace} owl old mv Blowlamp HOW TO USE THIS TABLE : I. Select the appropriate character to be entered from the CHARACTERS columns. 2. Find the corresponding KEYPAD BUTTON located on the same row. 3.
TROUBLESHOOTING TELEPHONE UNIT TROUBLESHOOTING TABLE SYMPTOM | SOLUTION No dial tone » Check for the telephone fine cord connectors at both ends that they are pushed in firmly fauna they click. * If you had a power failure or had unplugged the base unit, replace the handset on the base unit for two to five seconds to reset the system. Does not ring » Check sates if the programmable Ring Mode is set to i OFF, Refer to the “Function e : Setting Ring | ON/CUFF” section of the manual.
