User's Manual

Ethernet setting is as follows:
Users can select “Obtain IP from a DHCP Server”(it is recommended to use if the local
network area has DHCP server) or use the static settings below (It is recommended to use if local
network area has no DHCP server or DHCP IP address is not allowed to use)
Pic 4
WiFi Network Setting is as follows:
Users can use the “search” button to search WiFi by refresh or update the wireless AP list
and select the suitable AP (users also can input the AP by hands with the help of remote control),
and then input the password of the WiFi and click “OK” to finish the WiFi setting. If some AP
does not support DHCP IP address or his network environment does not allow using the DHCP IP
address, users can go to the “Advanced” to manually set the IP address interface (similar setting
as tat for Ethernet).
- 4 -