User's Manual

Pic 3
In Hardware terminal “Sever setting”, “Server IP” should be the IP address or domain name
of the information publication server (computer with iDS6 software installation). Please kindly
note that if for domain name inputting, do not add “http://”;
“Control port” is your information publication server control port, for example: 9090;
“Download port” is your information publication server website port, for example: 8080;
Control port and download port are the server configuration parameters, only those two
ports of the hardware terminal are same as the server control port and website port; the player
can connect to the server.
Note: When users need to input the numbers or letters in the configuration, “OK” button on
remote control or click the input field/box can allow users to use the virtual keyboard. Users can
input any number and letters via the Up, Down, Right and Left directions on the remote control.
“OK” button on remote control is used to select the numbers and letters, and “Exit” button on
remote control or on virtual keyboard is used to exit after inputting finished.
In Hardware Terminal Network Configuration, Users can select Ethernet, WiFi or Mobile
network according to actual conditions and to make configuration.
- 3 -