User's Manual

12
• Click on icon
Click on Control Panel
→
Appearance and Personalization
Click on Display
→
Connect to an external display
• Normally Display ① is the laptop's monitor, Display ② is the external
monitor. Click on Detect if you are unsure.
• At Display, select “2.HDMI” (digital video) or “2. display device: VGA”
(analog video) for Display
• Select Resolution “ 1920x1080 ” for the Monitor, Select "Landscape"
or "Portrait" for Orientation.
• If you cannot see the "1920x1080", please choose the most suitable
resolution. Select "Extend these displays" for Multiple display, and
drag Display ② to the right side of Display ① . For Duplicated mode,
select "Duplicate these displays". Select OK and exit after saving
the settings.
2.2.3 For Windows 7 System
Chapter 2: Set up