User Instructions

Method 2: WiFi enabled
Check WiFi Enable and wait for about 3 seconds, click Scan WiFi to scan available WiFi
nearby, select the WiFi and enter the password, click Save to save the WiFi configuration
to the control card.
After about 3 minutes, the control card will automatically search for the WiFi hotspot
connected to the configuration, and the "internet" light on the control card will flash
uniformly and slowly, indicating that it has connected to the cloud platform. At this time,
you can log in to the cloud platform www.m2mled.net to send the program.
Tips
If the WiFi cannot go online, you can troubleshoot the following situations:
1. Check whether the WiFi antenna is tightened;
www.sysolution.net
12