Users Manual

802.11bgn and BLE SoC
Shanghai ChipFresh Internet of Things Technology Co., Ltd
2
1 Module Overview
1.1
Features
MCU
• 32-bit RISC-V single-coreprocessor
• 160 MHz CPU
• 276 KB RAM
• 128 KB ROM
• 1 KbeFuse
Wi-Fi
• IEEE 802.11 b/g/n-compliant
•
Operation Frequency：
2412-2462MHz（802.11b/g/n ht20）
• Supports 20 MHz bandwidth in 2.4 GHz band
•
Transmit Power（25.12dBm）
• Modulation method
（
DSSS
、
OFDM
）
• 1T1R mode withdata rate up to 150 Mbps
• Security Mechanisms（WEP/WPA-PSK/WPA2-
PSK/WPA3-SAE
）
• Encryption（WEP64/WEP128/TKIP/AES）
• Support Wi-FiSTA/AP/AP+STA Mode
• Support UART Data Communication with Wi-Fi
or BLE
• Support APLink and BLELINK Config
• Support Wireless and Remote Firmware
Upgrade Function
• Support Software SDK for Develop
• Support PCB
BLE
• Operation Frequency：
2402-2480MHz
• Transmit Power（13.46dBm）
• Receiver Sensitivity
（
-97
dBm
）
• Advertising extensions
Hardware
• Peripherals: GPIO、SPI、UART、ADC、
DAC
、
IR
、
LED
、
PWM
• Support XTAL 24/32/38.4/40MHz
• 2MB SPI flash
• Operating voltage/Power supply
：
2.7 ~ 3.6 V
• Operating ambient temperature:
OperatingTemp: -40 ~ 85°C
Storage Temp: -40 ~ 105
°
C
Humidity/MSL: <85% / Level 3
• Operating Current:
Peak (1ms for every 100ms): <350mA
Average (STA, No data): 45mA
Average (STA, Continuous TX): 60mA
Average (AP): 70mA
Standby: 310uA(Reset Pin set to low)
• Size：Figure 3