User's Manual

X-C13SG
802.11bgn and BLE SoC
Shanghai ChipFresh Internet of Things Technology Co., Ltd
2
1 Module Overview
1.1
Features
MCU
• TG7100C embedded,32-bit RISC-V single-core
processor
• 160 MHz CPU
• 276 KB RAM
• 128 KB ROM
• 1 KbeFuse
Wi-Fi
• IEEE 802.11 b/g/n-compliant
•
Operation Frequency：
2412-2462MHz（802.11b/g/n ht20）
• Supports20 MHz bandwidth in 2.4 GHz band
•
Transmit Power
（
Max 22dBm
）
• Modulation method（DSSS、OFDM）
• Security Mechanisms
（
WEP/WPA-PSK/WPA2-
PSK/WPA3-SAE）
• Encryption（WEP64/WEP128/TKIP/AES）
• Support Wi-Fi STA/AP Mode
• Support UARTData Communication with Wi-Fi
or BLE
• Support APLink and BLELINK Config
• Support Wireless and Remote Firmware
Upgrade Function
• Support Software SDK for Develop
• Support PCB /IPEX Antenna Option
BLE
•
Operation Frequency：
2402-2480MHz
•
Transmit Power
（
10.30 dBm(BLE)
）
• ReceiverSensitivity（-97 dBm）
• Advertisingextensions
Hardware
• Peripherals: GPIO
、
SPI
、
UART
、
ADC
、
DAC、IR、LED、 PWM
• Support XTAL 24/32/38.4/40MHz
• 2MB SPI flash
• Operating voltage/Power supply：2.7~ 3.6 V
• Operating ambient temperature:
Operating Temp: -40 ~ 85
°
C
Storage Temp: -40 ~ 105 °C
Humidity/MSL: <85% / Level 3
• Operating Current:
Peak (1ms for every 100ms): <350mA
Average(STA, No data): 45mA
Average(STA, Continuous TX): 60mA
Average(AP): 70mA
Standby:310uA(ResetPin set to low)
• Support PCB
• Size：Figure3