User's Manual

2.1.3 Powering YI HALO with the External Battery
1. Make sure the external battery is on.
2. Plug the power cord to connect the external battery with YI HALO.
Note:
When turning YI HALO on, you may see a pop-up below from controller, please press ‘Yes’.
2.2 Inserting memory cards
YI HALO does not ship with microSD cards. The first time you use it you need to insert a
microSD card that is formatted to exFat format into each camera. MicroSD cards formatted
to Fat32 format on a Mac computer is also supported, but only Master Boot Record (MBR)
partitions will work in the camera. We highly recommend using cards listed below: