User's Manual

The rig will overheat and may stop recording.
- The chip temperature reaches 203℉.
Unit camera ran into problems, please reboot.
- The unit camera is disconnected with its cable inside the rig.
- The microSD card speed is slow.
- The camera is physically broken. You replace it with a backup unit camera.
- Unknown issues. Reboot the rig to fix this problem.
6.2 Customer Support
For further assistance, we are standing by for you at [e-mail].
6.3 Technical Specifications
Product Name
YI HALO
Unit Camera
YI HALO unit camera
Size
193mm (H)*284mm (D)
Weight
3000g
Camera mode
Video, Photo, Time Lapse Video
Image Sensor
Sony IMX377 sensor, 1/2.3’’, 12MP CMOS
Video Resolution
Input:
● 2.5K
29.97 NTSC frames per second, 25 PAL frames per second
● 1440P
59.94 NTSC frames per second, 50 PAL frames per second
Output (stitched from Jump Manager):
 3840 x 2160
 4096 x 4096
 5760 x 5760
 6144 x 6144 (only 2.5K resolution input supported)
 8192 x 8192 (only 2.5K resolution input supported)
Video Format
H.264, .MP4
Lens
7G F2.8 aperture, 155° wide-angle lens
Wi-Fi
802.11abgn 5G
Bluetooth
BLE4.0
Power
24V/3.75A
Operating
Temperature
0℃ ~ 40℃
This device complies with Part 15 of the FCC Rules / Industry Canada
licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
Le présent appareil est conforme aux CNRd'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes : (1)l'appareil ne doit pas produire de brouillage, et (2)