Manualshelf

User's Manual

ManualsBrandsShanghai Xiaoyi Technology ManualsCamera & PhotoYI Halo Camera
39404142434445464748
Bluetooth Pairing Timed Out
- The Bluetooth controller cannot work if it is broken or out of power.
- The Bluetooth controller is too far away from the rig.
Camera Busy
- The camera is operating other tasks and cannot handle this command at this
moment.
Firmware Verification Failed.
- The update bin files are corruption
Firmware Version Mismatch. Please update the camera firmware to the latest version.
- The firmware version of one or several unit cameras are different from others.
- The firmware of controller and unit cameras are different
Low Battery
- You need to charge the battery or power the rig from a power outlet.
No Firmware in SD card
- Cannot find a firmware file in the microSD card for update.
- The name of the update firmware file is incorrect.
No SD card
- No SD card is detected by the unit camera. Check that the microSD card is inserted.
The camera requires a U3 microSD card.
Rig overheated, the recording has stopped.
- The chip temperature reaches 212℉. The rig stops recording to protect itself. Cool
down the rig for 10~30 minutes.
SD card Format Not Supported
- SD cards that are not formatted to exFat or MS-Dos(Fat) file format (Mac) cannot
be used in the rig. Formatting the card can solve the problem.
SD card Error. Try to reinsert or format the SD card.
- The microSD card cannot be recognized or accessed. Check that if the card is
inserted correctly and not malfunctioning. Check if it is formatted in a right file
format. Use a recommended card.
SD card Full
- Available storage of the microSD card is less than 500MB. The rig stops recording.
Delete some clips to free some space or replace an microSD card.
SD card Almost Full
- Available storage of the microSD card is less than 2GB. You need to pay attention
to the residual storage.
SD card Slow
- The performance of microSD card is not good.
- You can try to format the card to solve the problem.
SD card Formatting Failed
- The microSD card has some problems and cannot be formatted from the rig. You
can try to use a computer to format it.