User's Manual

2. Remove the microSD cards from unit cameras.
3. Complete these steps for each microSD card.
● Insert the card to a card reader.
● Connect the card reader to your computer.
● Transfer the files to your computer.
● Delete the files from your card if needed.
Note:
● Before deleting the files, make sure to back them up.
● It is recommended to power off YI HALO first before inserting/removing the microSD
cards. Hot inserting/removing the microSD cards may cause recognition issue or
unintended consequences to the microSD cards.
4.5.1 Naming Conventions
YI HALO uses the following file naming convention when recording video.
[Video Type][Camera ID][Part Number][Shot Number].mp4
N 1 0 1 0 0 4 6.mp4
Video Type
Camera ID
Part Number
Shot Number
1. The first letter of videos indicates what the file type is.
- N: Video
- T: Time Lapse Video
2. The second letter of videos is the camera ID.
- The letter 1~9 represents camera #1 ~ camera #9. The letter A~G represents camera
#10~ camera #16. The letter H represents the up camera.
For example, file ‘N1010046.MP4’ in which the second letter 1 indicates that the video is
captured by camera #1. File ‘NA010046.MP4’ indicates that the video is captured by
camera #10.
3. The third and fourth letter of files is the number of parts.
- If a video is no more than 8 minutes, the third and fourth letter in the name should be
‘00’. If a video is more than 8 minutes, it will be divided into a part every 8 minutes.
For example, file ‘N1000046.MP4’ in which the ‘00’ shows that the video is less than 8
minutes. File ‘N1020046.MP4’ shows that it is the third part of the video.