User's Manual

4.3 Start Recording
Press the button located on the top of the controller to begin recording. The status LEDs
are red and flashing during recording.
Press the shutter button again to stop recording. The status LEDs flash once and the sound
indicator emits one beep, and then the LEDs turn to solid red.
Notes:
● Do not remove microSD cards during recording. If any microSD card is removed, the
rig will stop recording automatically within 30 seconds at most.
● Overheating –The rig stops recording automatically when any of the unit camera chips
reach 212 °F.
4.4 Indicators Displayed during Recording
1. Capture time
2. Remaining capture time
3. Number of video shots (See 4.5.1 Naming Conventions)
4.5 Exporting Files to a Computer
You can only play back the videos by exporting the files from each unit camera to a
computer.
1. Power off YI HALO.