User's Manual

remote. Press any button on your remote to pair it to the rig.
After pairing successfully, you can operate the rig up to 10 meters away. You can use the
Bluetooth remote to:
● Start recording
● End recording
● Shoot pictures
3.4.2 Screen Brightness
You can customize the brightness of the screen by tapping the ‘Brightness’ bar and select
between High, Middle and Low.
3.4.3 Screen Auto Sleep
If you turn the ‘Screen Auto Sleep’ on, the screen will automatically turn off after one minute
of inactivity. This is useful if you think recording cameras will be influenced by the screen
light. Also, this is helpful for power saving.
3.4.4 Beeps
You can set the volume for the sound indicator to be High (default), Low or Mute
3.4.5 LEDs
You can switch the light indicator on/off with this icon.
If the switch is on (default), when unit cameras are recording, the status lights will be red
and flash. When unit cameras are free, the red status lights are on.
3.4.6 Device Info
Tap the ‘Device Info’ bar to see the detailed information of your YI HALO, including the
model, the serial number, the firmware version and the date and time of the rig. Tap the
screen to back to the setting menu.