User's Manual

3.3.3 Time Lapse Video Settings
1. Flat Color
This setting in Time Lapse Video mode is the same as that in Video mode.
2. Interval
The interval setting only applies in Time Lapse Video mode. Interval determines the
amount of time that passes between each captured frame. Available intervals range from
0.5 second (default) to 60 seconds – 0.5s, 1s, 2s, 5s, 10s, 30s, 60s.
The interval you set depends on how fast the scene you would like to capture is changing.
A slower changing scene can allow a longer interval to achieve smooth playback.
In normal video mode, recording in 2.5K resolution at 29.97 frames per second would take
about 130 minutes to fill up a 64GB card. But in time lapse video mode, the time consumed
would be much longer. Setting interval to 0.5s, the rig would capture 2 frames per second.
Therefore, it would take 1920 minutes (32.5 hours) to fill up a 64GB card.
If accidental power outage or a recording fails during recording video, please do not remove
the card. The video captured previous would recover automatically after powering on the
rig.
Recommendations
Interval
Examples
0.5s
Driving
1s
Moving traffic
2s
Fast moving clouds
5s
Sunsets and sunrises
10s
Slow moving clouds
30s
Moving shadows
60s
Construction projects
3. Frame Rate
Time Lapse video is captured at 2.5K (2560 x 1920). YI HALO offers two frame rates:
● 29.97 FPS 2.5K
● 25 FPS 2.5K
4. ISO
This setting in Time Lapse Video mode is the same as that in Video mode.
5. Exposure Value
This setting in Time Lapse Video mode is the same as that in Video mode.