User's Manual
Table Of Contents
- G30 User Manual
- Product Overview
- Product specifications
- Instructions for use
- Start-up and setup process
- 3.2 Connection Diagram
- 3.3 Application note about SOS and recording function
- 3.4 Application Notes on ACC ON/OFF
- 3.6 MODE 2 and MODE 21 Operating Modes
- 3.7 Vehicle Guard Alarm and Low Battery Alarm
- 3.8 Device Photosensitive Alarm Description
- 3.9 Vehicle collision alarm parameter setting instructions
- 3.10 Vehicle acceleration/deceleration and sharp turning parameter settings
- 3.11 About time zone settings and related instructions
- 3.14 Common Query Commands
- 3.15 Common Setting Instructions
- Manage your device
- Cautions
2
FCG = SET1, ACCON1, ACCOFF1, A #
Automatic ACC detection
configuration for 12V
battery-
powered vehicles such as cars
and motorcycles.
ACCON1: ACC ON voltage, default 132
ACCOFF1: AC
C OFF voltage, default 128
A:
1. Enable the function of judging ACC status
based on voltage (default)
0, forbidden
Remarks: 132 means 13.2V, query instruction
FCG = SET1
3
FCG = SET2, ACCON2, ACCOFF2, A #
Automatic ACC detection
configuration for trucks, trucks and
other 24V powered battery vehicles.
ACCON2: ACC ON voltage, default 264
ACCOFF2: ACC OFF voltage, default 256
A:
1. Enable the function of judging ACC status
based on voltage (default)
0, forbidden
3.6 MODE 2 and MODE 21 Operating Modes
1) Pay attention to the relationship between ACCCTLGNSS and MODE, 21. The MODE, 21
instruction is only valid when ACCCTLGNSS, 1 #.
1
Device real-time online instructions:
MODE, 2, T #
T: Position reporting period when the vehicle
is moving, unit: second
T = [3,60
], default T = 10
Example: Mode, 2,10 # Device factory default