User's Manual
Table Of Contents
- G30 User Manual
- Product Overview
- Product specifications
- Instructions for use
- Start-up and setup process
- 3.2 Connection Diagram
- 3.3 Application note about SOS and recording function
- 3.4 Application Notes on ACC ON/OFF
- 3.6 MODE 2 and MODE 21 Operating Modes
- 3.7 Vehicle Guard Alarm and Low Battery Alarm
- 3.8 Device Photosensitive Alarm Description
- 3.9 Vehicle collision alarm parameter setting instructions
- 3.10 Vehicle acceleration/deceleration and sharp turning parameter settings
- 3.11 About time zone settings and related instructions
- 3.14 Common Query Commands
- 3.15 Common Setting Instructions
- Manage your device
- Cautions
3.2 Connection Diagram
Figure1. Connection Diagram
Serial
number
Description
Colour
Use
1 Equipment positive/V +
Red
Can be connected to vehicles with working
voltage of 8 ~ 36V, max 45V
2 Ignition test/ACC
White
Vehicle ignition detect
ion line, active high
3 Relay driver/RELAY
Yellow
Relay or speaker driver line, MAX 1A @
3
-45V
4 Equipment negative/V-
Black
Vehicle negative