User's Manual

1. Product Overview
 2G/3G/4G Global Frequency Bands Supported;
 Support cell ID base LBS(Location base service);
 Support all Global Navigation Satellite Systems (GNSS) that have been deployed,
default GPS+Beidou hybrid mode;
 Support MODE, 2 real-time tracking, device enter low power mode automatically
when [ACC OFF];
 Support MODE,21 real-time tracking with ultra-low power mode when [ACC OFF],
the working current <1mA;
 Wide range input voltage from 8-45V;
 Built-in anti-reverse connection and 1500W anti-surge protection circuit;
 High-temperature safety explosion-proof rechargeable lithium polymer battery;
 Built-in hardware monitoring circuit;
 Support remote control for fuel or electricity;
 Support hardware ACC detection and smart ACC detection without wiring;
 Support SOS alarm with the SOS button accessory;
 Support MIC accessory for voice recording;
 Built-in light detection alarm;
 Support wire cut alarm;
 Support low battery alarm;
 Support collision alarm and flip alarm;
 Support reporting for rapid acceleration, rapid deceleration, and sharp turns;
 Support weak signal alarm and signal recovery notification;
 Support real-time reporting of satellite signal strength;
 Support real-time reporting of network signal strength;
 Support real-time reporting of working voltage;
 Support real-time reporting of temperature; [optional]
 Support remote firmware upgrade;
 IP67 waterproof design.
2. Product specifications
 Frequency Band:
 Module CLM920_TE3: Version for EMEA/Korea/Thailand
4G LTE FDD: B5
4G LTE TDD: B41
3G UMTS/HSPA+:B5
2G GPRS/EDGE: 850MHz
 Module CLM920_TD3NA: Version for North America
4G LTE FDD: B5
4G LTE TDD: B41
3G UMTS/HSPA+: B5