User's Manual
Table Of Contents
- G30 User Manual
- Product Overview
- Product specifications
- Instructions for use
- Start-up and setup process
- 3.2 Connection Diagram
- 3.3 Application note about SOS and recording function
- 3.4 Application Notes on ACC ON/OFF
- 3.6 MODE 2 and MODE 21 Operating Modes
- 3.7 Vehicle Guard Alarm and Low Battery Alarm
- 3.8 Device Photosensitive Alarm Description
- 3.9 Vehicle collision alarm parameter setting instructions
- 3.10 Vehicle acceleration/deceleration and sharp turning parameter settings
- 3.11 About time zone settings and related instructions
- 3.14 Common Query Commands
- 3.15 Common Setting Instructions
- Manage your device
- Cautions
5. Cautions
1) Do not short circuit.
2) Do not put in fire or heat.
3) It is strictly prohibited for users to assemble or disassemble the battery by
themselves.
4) Do not use outside the allowed temperature range.
5) It is strictly forbidden to knock, disassemble or disassemble this product for repair
or modification.
6) The operating temperature environment and usage scenarios of the device will
affect the battery discharge efficiency.
FCC Statement:
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that
may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator& your body.