User's Manual
Table Of Contents
- G30 User Manual
- Product Overview
- Product specifications
- Instructions for use
- Start-up and setup process
- 3.2 Connection Diagram
- 3.3 Application note about SOS and recording function
- 3.4 Application Notes on ACC ON/OFF
- 3.6 MODE 2 and MODE 21 Operating Modes
- 3.7 Vehicle Guard Alarm and Low Battery Alarm
- 3.8 Device Photosensitive Alarm Description
- 3.9 Vehicle collision alarm parameter setting instructions
- 3.10 Vehicle acceleration/deceleration and sharp turning parameter settings
- 3.11 About time zone settings and related instructions
- 3.14 Common Query Commands
- 3.15 Common Setting Instructions
- Manage your device
- Cautions
3.15 Common Setting Instructions
1 SERVER,1,<domain/ip>,<port>
Set server command.
<domain/ip>: server domain or IP
<port>: server port
2 LANG,<language>
Set language.
1: Chinese
0: English
Default: English
3 CENTER,A,<TelNumber>
Set the center number: PARAM # can check the
center number information, which is use for some
remote control.
4 CENTER,D,<TelNumber> Delete center number.
5 APN,<name> Set APN.
6 APN,AUTOAPN Set to automatic APN.
7 RELAY,0/1#
1: Remote control set.
0: Remote control clear.
8 LED,0/1#
Controls whether the LED is always on:
LED, 1 # is always on;
LED, 0 # is off after five minutes (default is 0)
4. Manage your device
1) Manage device on WEB using the account and password provided by the your
distributor to login for device management and location tracking.
2) Manage device on APP using the account and password provided by the your
distributor to login for device management and location tracking.
3) You can use third party server to management your device, contact us for more
detail information.