User's Manual

Page 35
3.7 Change Administrator’s Password
The default administrator’s user name is Default (case sensitive) with empty password.
To ensure the Device's security, you had better change the default password and
remember it. If the password has been changed, you should enter your new password
when you access the Device with the user name Default.
If you want to change the password, go to System > Administrator page, do the
following setup (see Figure 3-16):
Step 1 Click the Default or Edit hyperlink of the default administrator’s entry in the
Administrator List, the related information will display in the setup fields.
Step 2 Then modify the password in the setup fields.
Step 3 Click Apply button to save and apply your settings.
Figure 3-16 Administrator’s Password Setup
① Click Default
② Modify password
③ Click Apply