User's Manual

Page 9
TRF
Blinking
Network activity on the Device.
Off
No activity on the Device.
FLT
Blinking
The Device is not operating correctly.
Off
The Device is operating correctly.
Link/Act
Green
Valid link on the associated port.
Blinking
Network activity on the associated port.
Off
No link established on the associated port.
100M
Green
The associated port is connected at 100Mbps.
Off
The associated port is connected at 10Mbps.
Table2-1 LEDs Description
2.1.2 Ports
Interface
Description
LAN (1, 2, 3, 4)
These Ethernet ports connect the Device to wired computers,
hubs, switches, and other Ethernet network devices.
WAN
This port connects to a cable or DSL modem, or other Ethernet
network device.
Table2-2 Ports Description
2.1.3 Reset Button
If you want to reset the Device to the factory default settings, press and hold in the Reset
button for more than 5 seconds when the Device is on, then release the button. After that,
the Device will restart with the factory default settings.
Note