User's Manual

UTT Technologies Chapter 5 System Status
http://www.uttglobal.com Page 74
5.7 System Log
In the Status > System Log page, you can view the system logs; also you can select the
types of logs that you want the Device to store and display.
5.7.1 System Log Settings
Figure 5-24 System Log Settings
 Select All: It selects or unselects all the check boxes below. If you want to enable all
the provided system log features at a time, please select this check box. If you want
to disable all the provided system log features at a time, please clear the check box.
 Enable Notice Log: It allows you to enable or disable notice log. If you want the
Device to store and display the notice related logs in the System Log, please select
this check box.
 Enable Dial Log: It allows you to enable or disable dial log. If you want the Device to
store and display the dial related logs in the System Log, please select this check
box.
 Enable NAT Log: It allows you to enable or disable NAT log. If you want the Device
to store and display the NAT related logs in the System Log, please select this check
box.
 Enable DHCP Log: It allows you to enable or disable DHCP log. If you want the
Device to store and display the DHCP related logs in the System Log, please select