User's Manual

UTT Technologies Chapter 5 System Status
http://www.uttglobal.com Page 68
to keep track of which hosts initiate data transfer. By keeping this record, the Device
is able to correctly route responses.
¾ Clear: Click it to delete all of the dynamic NAT sessions in the list.
Note
The clear operation may disconnect the dynamic sessions that are being used now,
so do it with caution.
5.6.3 Examples
5.6.3.1 Searching Internet Activities of the LAN User with IP
Address 192.168.16.68/24
Step 1 Go to the Status > Session Monitor page, see Figure 5-16.
Step 2 Select Source IP from the Filter Option drop-down list.
Step 3 Enter 192.168.16.68 in the Filter Value text box.
Step 4 Click the Search button to search and display all the matching NAT sessions in
the NAT Session List, see Figure 5-17.
Figure 5-16 Session Monitor Settings - Example1