User's Manual

UTT Technologies Chapter 5 System Status
http://www.uttglobal.com Page 54
shown as DD: HH: MM: SS.
 Pool Name: It displays name of the DHCP address pool.
 Status: It displays the status of the IP address. The possible values are Detecting,
Assigned, and Conflicted.
x Detecting: It indicates that the DHCP server is detecting whether the IP address
is already in use or not.
x Assigned: It indicates that the DHCP server has assigned the IP address to the
client.
x Conflicted: It indicates that the DCHP server has detected a conflict for the IP
address, i.e., there is another host on the network using the same IP address.
 Type: It displays the manner in which the IP address was assigned to the DHCP
client. The possible values are Static and Dynamic.
x Static: It indicates that the IP address was assigned manually through DHCP
manual binding.
x Dynamic: It indicates that the IP address was assigned dynamically from a
DHCP address pool by the DHCP sever.
 Client ID: It displays the client identifier of the DHCP client.
 Relay Agent ID: It displays the relay agent ID of the DHCP client.
¾ Bind: If you want to manually bind one or more dynamic IP addresses to the
corresponding MAC addresses, select the leftmost check boxes of them, and then
click the Bind button. Then you may go to the Advanced > DHCP > DHCP Server or
Security > IP/MAC Binding page or to view and modify those IP/MAC bindings.
¾ Refresh: Click it to view the latest information in the list.
¾ Display IP/MAC Binding: Click it to go to the Security > IP/MAC Binding page to
view or configure IP/MAC bindings for the LAN hosts.
Note
In the DHCP Pool Statistics list, only the dynamic IP addresses can be bound
manually, but the static IP addresses cannot be bound again.