User's Manual

UTT Technologies Chapter 5 System Status
http://www.uttglobal.com Page 53
5.3 DHCP Statistics
This section describes the Status > DHCP Stats page, including the DHCP Pool
Statistics list, DHCP Server Statistics list, DHCP Conflict Statistics list, DHCP Client
Statistics list and DHCP Relay Statistics list.
5.3.1 DHCP Pool Statistics List
The DHCP Pool Statistics list displays the usage information of each DHCP address pool,
including IP address and subnet mask, associated MAC address, lease left, DHCP
address pool name, status of IP address, and so on.
It allows you to manually bind one or more dynamic IP addresses to the corresponding
MAC addresses. The steps are as follows: Click the leftmost check boxes of the entries
you want to bind, and then click the Bind button to bind the selected IP and MAC address
pairs. Then you may go to the Advanced > DHCP > DHCP Server or Security > IP/MAC
Binding page to view or modify them.
Figure 5-7 DHCP Pool Statistics List
 ID: It is used to identify each entry in the list.
 IP Address: It displays the IP address of the DHCP client.
 Subnet Mask: It displays the subnet mask of the DHCP client.
 MAC Address: It displays the MAC address of the DHCP client.
 Lease Left: It displays the time remaining until the current IP address lease expires,