User's Manual

UTT Technologies Chapter 4 Quick Wizard
UTT Technologies http://www.uttglobal.com Page 44
4.4.4 DHCP Internet Connection Settings
Figure 4-8 Choosing DHCP as the Connection Type
In the page of choosing an Internet connection type (see Figure 4-8), select the DHCP
radio button, and then directly click the Continue WAN2 Settings button to continue to
configure the Internet connection on the WAN2 interface if needed, or click the Skip
WAN2 Settings button to the confirmation page at the end of the Quick Wizard if you
don¶t want to configure another Internet connection in the Quick Wizard.
4.5 Reviewing and Saving the Settings
After you have finished configuring one or more Internet connections, you had better click
the Review Your Configuration button in the Quick Wizard¶s confirmation page to
review the settings that you have made in the Quick Wizard firstly, and then modify any of
them if desired, lastly click the Finish button to save the settings to make them take effect.
Note
Do not forget to click the Finish button to save the settings you have made in the
Quick Wizard, else the related settings will be discarded.