User's Manual
UTT Technologies Chapter 4 Quick Wizard
UTT Technologies http://www.uttglobal.com Page 43
IP Address: It specifies the IP address of the WAN interface, which is provided by
your ISP.
Subnet Mask: It specifies the subnet mask of the WAN interface, which is provided
by your ISP.
Default Gateway: It specifies the IP address of the default gateway, which is
provided by your ISP.
Primary DNS Server: It specifies WKH,3DGGUHVVRI\RXU,63¶VSULPDU\'16server.
Secondary DNS Server: It specifies the IP address of your ISP¶s secondary DNS
server. If it is available, you may set it. Else, please leave it 0.0.0.0.
¾ Back: Click it to go back to the previous page of the Quick Wizard.
¾ Continue WAN2 Settings: Click it to continue to configure the Internet connection on
the WAN2 interface if needed.
¾ Skip WAN2 Settings: Click it to go to the confirmation page at the end of the Quick
Wizard if you don¶t want to configure another Internet connection in the Quick
Wizard.
Note
The WAN IP address and default gateway IP address should be on the same subnet. If
they are not, please modify the Subnet Mask to make them be on the same subnet. If
you don¶t have the subnet related knowledge, please ask a professional or UTT
customer engineer for help.