User's Manual

UTT Technologies Chapter 4 Quick Wizard
UTT Technologies http://www.uttglobal.com Page 40
4.4 Internet Connection Settings
4.4.1 Notes on Internet Connection Settings
1. If you have changed the LAN IP address and saved the change, you should use the
new IP address to re-login to the Device. And each LAN host¶s default gateway
should be changed to this new IP address to access the Device and Internet
normally.
2. After you have finished configuring the Internet connection on the WAN1 interface,
you also can continue to configure the Internet connection on the WAN2, WAN3 and
WAN4 interface in turn. Note that the number of WAN interfaces depends on the
specific product model.
3. After you have finished configuring one or more Internet connections, you had better
click the Review Your Configuration button in the Quick Wizard¶s confirmation
page to review the settings that you have made in the Quick Wizard firstly, and then
modify any of them if desired, lastly click the Finish button to save the settings to
make them take effect.
4.4.2 PPPoE Internet Connection Settings