User's Manual

UTT Technologies Chapter 4 Quick Wizard
UTT Technologies http://www.uttglobal.com Page 37
Chapter 4 Quick Wizard
This chapter describes the Basic > Quick Wizard page. The Quick Wizard allows you to
configure the basic parameters to quickly connect the Device to the Internet.
Before using Quick Wizard, you need properly install and configure TCP/IP properties on
the LAN PCs. Refer to section 3.1 Configure Your PC for detailed operation.
4.1 Running the Quick Wizard
Click the Quick Wizard hyperlink at the top of the Web page or click Basic > Quick
Wizard to run the Quick Wizard. The Quick Wizard will guide you to configure the most
basic features of the Device, such as Internet connection settings. Even if unfamiliar with
our product, you still can finish the settings via instruction easily.
Figure 4-1 Running the Quick Wizard
¾
Exit the Wizard: Click it to exit the Quick Wizard.
¾ Next: Click it to go to the next page of the Quick Wizard to set the IP address and
subnet mask of the LAN interface.