User's Manual

UTT Technologies Chapter 3 Logging in to the Device
UTT Technologies http://www.uttglobal.com Page 34
3.2 Logging in to the Device
No matter what operating system is installed on the PC, such as, MS Windows, Macintosh,
UNIX, or Linux, and so on, you can configure the Device through the Web browser (for
example, Internet Explorer).
Once your PC is properly configured, please do the following to login to the Device: Open
a Web browser, enter the Device¶s LAN IP address in the address bar (by default, the
address is 192.168.16.1, see Figure 3-1), and then press <Enter> key.
Figure 3-1 Entering IP address in the Address Bar
A login screen prompts you for your user name and password. When you first login to the
Device, you should use the default administrator account: Enter Default (case sensitive)
in the User name field, and leave the Password field blank (see Figure 3-2), lastly click
OK.
Figure 3-2 Login Screen
Once you have entered correct user name and password, the Status > System Info page
will appear (see Figure 3-3).